Nissan Skyline R32 GTR and GTS4 Inner and Outer Tie Rods - USDM Replacement
RB Motoring
Nissan Skyline R32 GTR and GTS4 Inner and Outer Tie Rods - USDM Replacement
A common wear and tear item on the Nissan Skyline R32 GTR and GTS4 are the inner and outer tie rods. Over time these wear out and should be replaced, and they aren’t too expensive, so when modifying anything on the steering rack, it would be a good idea to replace them at the same time.
Luckily, the Skyline R32 has a replacement part that is available in the USA.
Both the Z32 (300ZX) 89-96 model year tie rods work for the Nissan Skyline R32 GTR and GTS4.
The GTR and GTS4 variants of the R32 both use this tie rod rod end (inner and outer). They are generally around $30 each per side, and as long as your car isn’t slammed, will work just fine. We have used the Moog and other aftermarket brands on a few R32 Skylines (both GTR and GTS4) without an issue.
If your car is really low, we recommend a set of high misalignment tie rod ends, that will allow them the adjustment necessary to not have bump steer. You can purchase them below:
GKTech also makes a set of inner tie rods that have a ton more adjustment for those of you that are drifting or racing your vehicles and want additional adjustment for front suspension. If you have upgraded knuckles, arms, etc, and having issues with getting the correct alignment, consider the tie rods at the link below: